O.S.PROFESSIONAL

>O.S.PROFESSIONAL

UAV/ドローン用動力源のブランド。O.S.PROFESSIONAL

トップ > OCM-3055HV仕様

 

寸法(Dimension) (mm)
A 72.0
B 85.0
C 35.0
D 15.5
E 85±5
F 110±10
G 240±10
H 140±10
I Φ3.5/14凹connector
項目 Item 単位:Unit  
重量 Weight g 115±10
入力信号周期 Refresh Rate Hz 50-600
入力電圧範囲 Voltage Range V 11.1-52.2
(※)最大入力電流 Maximum Current A(180Sec.20°) 55
(※)定格入力電流 Rated Input Current A(20°C) 30
BEC     無/None
進角範囲 Advance Timing   自動/Auto
PWM周波数 PWM Rate   自動/Auto
電源リード(耐熱200℃) Power Leads(Heat-resistant 200℃) AWG 13
モーターリード(耐熱 200°C) Motor Leads(Heat-resistant 200℃) AWG 14
入力信号リード
(白-赤-黒)
Signal Lead
(White-Red-Black)
AWG 22
パラメーターリード
(橙-赤-茶)
Programming Lead
(Orange-Red-Brown)
AWG 22

※ESCは運転中の性能を維持するために、プロペラ後流等の冷却用の空気(風速5m/s以上、環境温度20℃)を必要とします。 ESCを冷却流が当たらない場所に設置すると、性能を維持出来なくなることが有ります。
※:During ESC operation, in order to maintain a maximum current and rated current, the entire heat sink, the cooling air (wind of propeller etc.),wind speed (5 m/s or higher) is required.If the environmental temperature is 20℃.The maximum performance limit of ESC greatly changes depending on environmental factors such as air temperature and humidity.

 

OCM-3055HV

リンク

ページのトップへ戻る