 |
|
 |
|
Code No. |
Type |
Angle |
Type of Engine |
72109660 |
M10 Side 60D |
60 |
FSα56·FS40S·52S |
72109670 |
M10 Headstand 80D |
80 |
FSα56·FS40S·52S |
72109680 |
M11 Side 60D |
60 |
FSα72·81 FS70S·91SII |
72109690 |
M11 Headstand 80D |
80 |
FSα72·81 FS70S·91SII |
72109700 |
M12 Side 60D |
60 |
FSα110 |
72109710 |
M12 Headstand 90D |
90 |
FSα110 |
72109750 |
M16 Side 60D |
60 |
FS200S SERIES |
72109760 |
M16 Headstand 80D |
80 |
FS200S SERIES |
Inside fuselage |
|
(72109200)
For FS-120S-E, S III
(72109500)
For FS-70S II, 91S II, 70U, FL-70,
FSα-72, FSα-81 |
*The above manifolds must be used with flexible exhaust pipes.
|
Outside fuselage |
|
(72109300)
For FS-120S-E, S III
(72109600)
For FS-70S II, 91S II, 70U, FL-70,
FSα-72, FSα-81 |
*The above manifolds must be used with flexible exhaust pipes.
|
|
|
(72102100)
For 140RX,RX-FI |
Code No. |
Type of engine |
43069200 |
FS-30S (9mm 2pcs./set) |
45626010 |
FS-40S, 52S, FSα-56(10mm) |
45626030 |
FL70, FS-70SII, 70U, 91, FSα-72,81,81-P(11mm) |
45526400 |
FS-120S-E, FSα-110, 110-P(12mm) |
45526032 |
FS-120SIII, FSα-155-P (14mm) |
44525210 |
FS-200S (16mm) |
41651300 For ROTARY TYPE II |
|
|
To install on the silencer installing face of the 50 size helicopter
engine. Since it is made of phosphor bronze, it assures more tight fit
which prevents from exhaust leaking and improves the durability of the
fitting area and maintenance.
(72144040) included 3 pcs.
Engines to suit
For 50SX-H Hyper, 55HZ Hyper
|
|
|
 |
|
 |
|